high vacuum fume extractor supplier unit has six specifications, divided into three kinds, a kind of door annihilation, drawer, no door annihilation nor drawer; As required, the lower part of the addition is directly connected to the dust collecting equipment such as the top of the warehouse, the silo, the transport point of belt transportation and transfer, and the dust is directly recovered. The high vacuum fume extractor supplier shall install it near the mechanical equipment that produces dust, and the user shall install it according to the size of the upper air inlet of the dust collector. Equipped with metal or plastic pipes and dust cover (can also be designed by the manufacturer), before the dust collector work should check the access door, each flange connection is sealed, so as to avoid air leakage, reduce the dust removal effect. Dust collector is, voltage, from the dust collector external wire street power supply can start to use, the initial operation, should pay attention to the fan rotation direction (such as reversal, need to replace the power wiring.

　　high vacuum fume extractor supplier is usually installed at the top of cement tank and fly ash tank. According to the pore size of cement, fly ash, stone powder, mineral powder, chemical powder and other powdered substances, the filter element of the dust collector is designed to influence the pore size of the filter element through large diameter and adhesion effect. All can meet the filtration requirements of each powder substance. Small high vacuum fume extractor suppliers generally have enclosures in which components such as filter bags and flight clearance mechanisms are housed. The shell is usually divided into two dust collector dust removal mechanism parts: one is the dust chamber, equipped with an air inlet, is the place where the dust gas enters; That's where the purified gas goes out. The other part is a clean air chamber with an exhaust port and manholes or hand holes in the housing for inspection and maintenance.

　　high vacuum fume extractor supplier cleaning mechanism, is the use of electric motor to drive the pain wheel, connecting rod to make the cloth bag vibrate and remove the dust on the surface of the filter bag. Its control installation is divided into two kinds: automatic control and manual control. Automatic control means that when the fan continues the task, the high vacuum fume extractor supplier takes the initiative to vibration and dust cleaning mechanism on time. After the hand-controlled fan dust collector stops, the cleaning mechanism takes the initiative to stop after dozens of seconds. It can also start the cleaning motor to vibration and dust cleaning at any time according to the demand. Cleaning time length by the user to adjust the time relay. Structure performance features: high vacuum fume extractor supplier, dust catcher is a small volume, dust removal air purification equipment. Suitable for all kinds of vertical dust production points, flexible and convenient, local dust collection, local treatment, can be clean air. The basic structure is composed of dust removal box, centrifugal fan, filter bag (filter cylinder), dust collector and microcomputer controller, etc. The dust is sucked into the dust collector box by the negative pressure of the fan through the suction pipe, and the coarse dust is initially filtered by the filter and directly drops to the dust collector by gravity. The fine dust is captured by the filter on the outer surface. The clean gas flows into the clean room after filtration, decomposition and purification through the filter element, and is discharged from the outlet by the fan.

　　high vacuum fume extractor supplier https://www.kaisenfilter.com/High-Vacuum-Fume-Extractor